View ES3G_659376.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
ES3F AND ES3G
SURFACE MOUNT ULTRAFAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 300 to 400 Volts
DO-214AB
Forward Current - 3.0 Amperes
FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mount applications Low profile package Built-in strain relief Ideal for automated placement Easy pick and place Superfast recovery time for high efficiency Glass passivated chip junction High temperature soldering: 250C/10 seconds at terminals
0.126 (3.20) 0.114 (2.90)
0.245 (6.22) 0.220 (5.59)
0.280 (7.11) 0.260 (6.60) 0.012 (0.305) 0.006 (0.152)
0.103 (2.62) 0.079 (2.06)
MECHANICAL DATA
0.008 (0.203) MAX. 0.320 (8.13) 0.305 (7.75)
0.060 (1.52) 0.030 (0.76)
Dimensions in inches and (millimeters)
Case: JEDEC DO-214AB molded plastic body over passivated chip Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.007 ounces, 0.21 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25C ambient temperature unless otherwise specified.
SYMBOLS
ES3F
ES3G
UNITS
Device marking code Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL=100C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TL=100C Maximum instantaneous forward voltage at 3.0A Maximum DC reverse current at working peak reverse voltage Maximum reverse recovery time (NOTE 1) Maximum reverse recovery time (NOTE 2) Maximum reverse recovery current (NOTE 2) Maximum stored charge (NOTE 2) Typical junction capacitance (NOTE 3) Typical thermal resistance (NOTE 4) Operating junction and storage temperature range
NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at IF=1.0A, di/dt=100A/s, VR=30V, Irr=0.1IRM (3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (4) Units mounted on P.C.B. with 0.31 x 0.31" (8.0 x 8.0mm) copper pad areas NOTICE: Advanced product information is subject to change without notice
EF VRRM VRWM VRMS VDC I(AV) IFSM VF IR trr trr IRM Qrr CJ RJA RJL TJ, TSTG 300 225 210 300 3.0 100 1.10 10.0 350 35 50 3.0 50 30 50 15 -55 to +150
EG 400 300 280 400 Volts Volts Volts Volts Amps Amps Volts A ns ns Amps ns pF C/W C
TA=25C TA=100C
4/98
RATING AND CHARACTERISTIC CURVES ES3F AND ES3G
FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
3.0
PEAK FORWARD SURGE CURRENT, AMPERES
RESISTIVE OR INDUCTIVE LOAD
150
8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) at TL=100C
AVERAGE FORWARD RECTIFIED CURRENT, AMPERES
125 100 75 50 25 0 1 10
NUMBER OF CYCLES AT 60 HZ
2.0
1.0
0 80
90
100
110
120
130
140
150
100
LEAD TEMPERATURE, C
100
INSTANTANEOUS FORWARD CURRENT, AMPERES
INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
1,000
TJ=125C
10
TJ=25C PULSE WIDTH=300s 1% DUTY CYCLE
100
TJ=100C
10
1
1
TJ=25C
0.1
0.1
0.01 0.4
0.6
0.8
1.0
1.2
1.4
1.6
0.01 0
20
40
60
80
100
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
FIG. 5 - REVERSE SWITCHING CHARACTERISTICS RECOVERED STORED CHARGE/REVERSE RECOVERY TIME nC/ns
FIG. 6 - TYPICAL JUNCTION CAPACITANCE
200
@5A,50A/s
100
TJ=25C f=1.0 MHZ Vsig=50mVp-p
160
120
@2A,20A/s @5A,50A/s @2A,20A/s @1A,100A/s
80
40
@1A,100A/s trr Qrr
0
25
50
75
100
125
150
175
JUNCTION CAPACITANCE, pF
JUNCTION TEMPERATURE, C
1 0.1
1
10
100
REVERSE VOLTAGE, VOLTS

▲Up To Search▲

Price & Availability of ES3G

	To Download ES3G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .